Exothermic Welding Accessories: Mould Support Clamp

Exothermic Welding Accessories: Mould Support Clamp

Download PDF

Product Information:

A Mould Support Clamp is used to hold the graphite mould in place when making connections to vertical earth rods. Use with mould types BR1; BR2; BR7; Cr1; CR2 and CR3.

More Information:

We run operator training courses to train field operatives on how to safely carry out an exothermic weld.

Before making a KingsWeld connection:

  • Always wear proper clothing, gloves and safety glasses when exothermic welding.
  • Read the general safety instructions and the positioning of conductors sheet supplied with each KingsWeld mould to familiarise yourself with the procedure you are going to perform.
  • Make sure the conductors that are to be welded are dry, dirt-free and clean.
  • Use the wire brush to clean the conductor surfaces being placed inside the mould – the cleaner the surface the better the connection will be.
  • Attach the handle clamp to the KingsWeld mould and check it will open & close freely.
  • Make sure that the KingsWeld mould is dry and moisture free. The best way to do this is by pre-heating the mould with a blow torch or by making a test connection.
DESCRIPTIONPART NO.
Mould Support ClampMSC